
Welcome to
XDealerTechs
Automotive Service & Repair
servicing most makes and Models

Top-notch AUTO
Services

Complete & Reliable
Automotive
Service & Repair

Expert European Automotive Services
Our seasoned technicians ensure optimal performance with expert diagnostics, refinement, and customized maintenance. Elevate your drive with confidence, where every shift is effortless.

Serving Columbia, Since 2013

XDealerTechs
What sets XDealerTechs apart from all of the others in Columbia, MD?


Quality Service
We work on all makes and models, with the ability to do in depth diagnostics and repairs on Mercedes and Lexus that other shops can’t. We use the latest diagnostic equipment and high-quality parts to ensure your vehicle is repaired to the highest standards.
Experienced and Certified Technicians
Our technicians are highly skilled and certified professionals with over 30 years of experience in the auto repair industry. They have the expertise to diagnose and repair any problem your vehicle may have.


Customer Satisfaction
We service and repair all vehicles, but we do repairs on Mercedes and Lexus that can typically only be done at the dealership.

Why Choose
XDealerTechs

Car service you can trust

Make an Online
Appointment
Recently Serviced Vehicles
-
2015 Mazda 3
Mileage115,240Service Date6/19/2026Services Performed- Oil change Inspect tires Inspect brakes
- A bit over torqued – didn't want it to strip out next oil change
Benjamin B. gave our service a 5 star review on 6/20/2026 -
2011 Mercedes-Benz E350
Mileage99,467Service Date6/17/2026Services Performed- Could not verify abnormal fan operation. Performed computer health check and did not find any diagnostic trouble codes relevant to the fan. It's possible the fan ran on high when hot outside due to A/C pressure. The secondary air pump can be heard when 1st started
- Recommend air pump replacement
- Replace air pump
Steve K. gave our service a 5 star review on 6/20/2026 -
2020 Lexus NX 300
Mileage45,672Service Date6/17/2026Services Performed- Engine Fault: -P045500 Evaporative emission (EVAP) system leakage detected (large leakage) -P04419C Evaporative emission (EVAP) system purge flow incorrect low/insufficient flow -P017100 System too lean (bank 1) -P117000 Fuel performance/port injector -P117B00 Fuel performance/direct injector The purge valve is zip tied to a bracket. Activated purge valve with scan tool and got no response. Inspected wiring and found no evidence of rodent damage. Checked signal to valve and verified duty cycle voltage. Recommend evap purge valve
- Replace EVAP purge valve
Edie J. gave our service a 5 star review on 6/18/2026 -
2018 Audi Q5
Mileage117,208Service Date6/11/2026Services Performed- Give quote for transmission service
- Water pump/thermostat assembly not leaking. Drive belt is ok, no cracks and not worn deep into grooves
- Drain and refill transmission fluid
Camille K. gave our service a 5 star review on 6/12/2026 -
2011 Audi Q5
Mileage143,834Service Date6/10/2026Services Performed- Oil and filter replacement Adjust tire pressures and inspect wear and condition Brake inspection Visual inspection for leaks Inspect and correct accessible fluid levels
Rocco C. gave our service a 5 star review on 6/11/2026 -
2015 Mazda 3
Mileage115,240Service Date6/19/2026Services Performed- Oil change Inspect tires Inspect brakes
- A bit over torqued – didn't want it to strip out next oil change
Benjamin B. gave our service a 5 star review on 6/20/2026 -
2011 Mercedes-Benz E350
Mileage99,467Service Date6/17/2026Services Performed- Could not verify abnormal fan operation. Performed computer health check and did not find any diagnostic trouble codes relevant to the fan. It's possible the fan ran on high when hot outside due to A/C pressure. The secondary air pump can be heard when 1st started
- Recommend air pump replacement
- Replace air pump
Steve K. gave our service a 5 star review on 6/20/2026 -
2020 Lexus NX 300
Mileage45,672Service Date6/17/2026Services Performed- Engine Fault: -P045500 Evaporative emission (EVAP) system leakage detected (large leakage) -P04419C Evaporative emission (EVAP) system purge flow incorrect low/insufficient flow -P017100 System too lean (bank 1) -P117000 Fuel performance/port injector -P117B00 Fuel performance/direct injector The purge valve is zip tied to a bracket. Activated purge valve with scan tool and got no response. Inspected wiring and found no evidence of rodent damage. Checked signal to valve and verified duty cycle voltage. Recommend evap purge valve
- Replace EVAP purge valve
Edie J. gave our service a 5 star review on 6/18/2026 -
2008 Toyota Highlander
Mileage179,715Service Date5/29/2026Services Performed- Check alternator with midtronics tester Check for loose cables or damaged wires Wiring ok, alternator is not charging – replace alternator
- Sprayed down with water can't find the leak – door seal is in tact, Lf area infront of the driver door is wet – suspect windshield seal.
- Replace alternator
- Replace water pump
Larry B. gave our service a 5 star review on 5/30/2026 -
2013 Nissan Rogue
Mileage64,691Service Date5/19/2026Services Performed- The CV boots are not torn or leaking Outer tie rod boots torn, no play in joints
- Replace both front outer tie rods
- alignment
Winston S. gave our service a 5 star review on 5/20/2026 -
2019 Mercedes-Benz GLC300
Mileage66,826Service Date5/18/2026Services Performed- Road tested vehicle and was unable to verify complaint SAM Fault: -B181E64 STORED NOT CURRENT The sensor for the engine hood has a malfunction. There is an implausible signal Collision Prevention Assist Fault: C10CF00 STORED NOT CURRENT The collision prevention assist is disrupted by interference from an external transmitter Telematics Fault: -B15D813 STORED NOT CURRENT The cable for audio muting has a malfunction. There is an open circuit None of these STORED codes have any relevance to the dash going out. Checked cowl drains and found no evidence of water inside the vehicle
LaMarr S. gave our service a 5 star review on 5/19/2026 -
2005 Mercedes-Benz C240
Mileage88,358Service Date5/15/2026Services Performed- Engine fault: -P2075-2 Purge control system has a slight leak -P2014-2 Purge control system has slight leak -P2034 Crankshaft position sensor The engine is stalling because of a faulty crankshaft position sensor. Tested evap system and found faulty purge valve. Recommend crank position sensor (stalling) and purge valve (check engine light)
- Replace engine oil (Mobil1) and filter (fleece filter on applicable models) Check the condition of tires and set pressures (including spare) Measure tire tread depth Inspect the engine air filter Perform midtronics battery load test Clear and remove debris from cowl area Inspect and top off coolant, power steering, brake and washer fluids Inspect and measure brakes Inspect exterior lights, windshield wipers for proper operation Visual inspection for fluid leaks Reset FSS maintenance indicator
- Replace crankshaft position sensor
- Replace evaporative emissions purge valve
- Brake fluid flush
Rezea D. gave our service a 5 star review on 5/16/2026


Contact Us Today for an Auto Repair Estimate

Hours
Mon-Fri : 9am-5:30pmSat-Sun : Closed







